|
|
| Miscellaneous Parts |
| Datsun Z V-8 Mounting Kit, #DAT-200 |
28 |
365.00
(UPS Ground) |
|
| Set Back Plate, Passenger Side, #DAT-101 |
3 |
30.00
(Priority Mail) |
|
| Set Back Plate, Driver Side, #DAT-102 |
4 |
35.00
(Priority Mail) |
|
| Spacer, Aluminum (1.25 Inches Thick),
#DAT-103 |
1 |
25.00
(Priority Mail) |
|
| Spacer, Aluminum (2.25 Inches Thick),
#DAT-104 |
2 |
30.00
(Priority Mail) |
|
| Spacers (between body and front crossmember),
one pair, #DAT-105 |
3 |
25.00/pair
(Priority Mail) |
|
Transmission Crossmember, #DAT-106
—Please specify if for T56 or T5, 700-R4, Turbo 350.
—T56 crossmember is 1" lower in center, and requires hammering sides of transmission tunnel. —280 Z car requires flattening of floor to bolt the crossmember to the floor.
|
10 |
85.00
(Priority Mail) |
|
| Hood Latch Firewall Bracket, #DAT-107 |
2 |
25.00
(Priority Mail) |
|
| Hood Latch Bracket, Removable, #DAT-108 |
2 |
20.00
(Priority Mail) |
|
| Speedometer Cable (70 Inch), #DAT-111 |
2 |
85.00
(Priority Mail) |
|
| 90° Angle Drive with .66:1 Reduction Ratio, #DAT-130 |
1 |
70.00
(Priority Mail) |
|
| Strut Spacers, pair, #DAT-160 |
1 |
50.00
(Priority Mail) |
|
| Cooling Parts |
• Now! Download
entire Cooling System chapter (Chapter 12 of Datsun-Z manual)
(Adobe
Acrobat .pdf — if you need the free Acrobat Reader, go
here) |
| Datsun Z Aluminum Radiator, #DAT-121
PLEASE NOTE: the actual weight of this item is less than ten lbs., but it has an
oversize dimensional shipping weight, calculated as 30 lbs.
Please note, the radiator does not have an automatic transmission cooler.
|
30 |
185.00
(UPS Ground) |
|
Radiator Mounting Kit,
#DAT-125
The mounting kit is now made from aluminum to save weight and includes aluminum flat bar for mounting electric fans. Page 12-5 |
10 |
85.00
(UPS Ground) |
|
| V8 Z Car Water Temperature
Bushings, 1/2 NPT, #DAT-126 |
1 |
21.00
(First Class Mail) |
|
| V8 Z Car Water Temperature
Bushings, 3/8 NPT, #DAT-127 |
1 |
21.00
(First Class Mail) |
|
Hose Splicer Kit, #DAT-128 , includes one 1-1/4", two 1-1/2" brass hose splicers and one 1-1/2"
to 1-1/4" hose reducer bushing. Page 12-8
|
1 |
20.00
(First Class Mail) |
|
Air-Bleed Valve, #DAT-129,
Specify size: 1-1/4", 1-5/16". 1-3/8", or 1-1/2"
|
1 |
27.00
(First Class Mail) |
|
Tee for Radiator Hose,
You must specify a size —
Use photo on the TPI tee page to check sizes for all models |
1 |
24.00
(First Class Mail) |
|
Headers: (d-port usually found on LT1, ZZ3, ZZ4…)
Our headers will work with stock heads, but may not fit all aftermarket heads (e.g., Dart).
|
Headers. 1-1/2" primary tubes, (price is per pair). #DAT-401 - mild steel
#DAT-401C - ceramic coated
Will work with stock heads, but may not fit all aftermarket heads (e.g., Dart). |
18 |
steel: 190.00/pair
(UPS Ground) |
|
ceramic: 290.00/pair
(UPS Ground) |
|
Headers. 1-5/8" primary tubes, Page 14-12.
#DAT-402 - mild steel
#DAT-402C - ceramic coated
Will work with stock heads, but may not fit all aftermarket heads (e.g., Dart).
Please also indicate if heads have a D-Port,
when adding this item to cart
(d-port usually found on LT1, ZZ3, ZZ4…) |
20 |
steel: 220.00
(UPS Ground) |
|
ceramic: 320.00
(UPS Ground) |
|
| Driveshaft Flanges |
Drive Shaft Adapter Flange (2.25 Inch
Pilot), for 1970–1978 Z Cars, #DAT-110
|
3 |
75.00
(Priority Mail) |
|
Drive Shaft Adapter Flange (2 Inch
Pilot), for 1975 Z Cars, #DAT-110-2.0
|
3 |
85.00
(Priority Mail) |
|
Drive Shaft Adapter Flange (2 Inch
Pilot), for 300ZX Cars, #DAT-110-300ZX
|
3 |
80.00
(Priority Mail) |
|
Quick Scroll: