Stealth Conversions, The Parts Division of JTR (Jaguars That Run)

V8 Datsun Z Car,
     Strut Spacers    

Stealth Conversions
The Parts Division of JTR (Jaguars That Run)
contact us
Home/Site Map | About JTR | Jaguar | Chevy S-10 | Chevy TPI & TBI | Astro Van V8 | Volvo 200 | Volvo 700 | Datsun Z Car
Please Use the Books Ordering Form to order manuals!

back to Datsun Z Car V-8 Parts Order Form

Strut Spacers, for Datsun Z V8
Strut Spacers,<span for Datsun Z V8

Pair of Strut Spacers

Strut Spacers (pair), for Datsun Z Cars. #DAT-160, $50, including shipping

STRUT SPACERS

Strut spacers for Datsun Z car.

These install between the bottom of the strut and the steering knuckle. Their purpose is to raise the front roll-center on a lowered car. These should not be used on a car that is at stock ride height. They do not affect bumpsteer.

The strut spacers shown above are made inhouse and are machined from 6061 aluminum. Grade 8 bolts (or equivalent) are included. They are 3/4" thick and will not cause clearance problems on 14" rims.

last updated 08/22/2010



Home/Site Map | About JTR | Jaguar | Chevy S-10 | Chevy TPI & TBI | Astro Van V8 | Volvo 200 | Volvo 700 | Datsun Z Car


Jump Back to the Top

JTR engine swapping manuals are available directly from JTR Publishing,
As well as through a number of retailers, including:
• Summit Racing (S-10: Part #JTR-S10; Jaguar: Part #JTR-JAG),
• JEGS (S-10: Part #116549; TPI & TBI: Part #117942),
• Steve Smith Autosports (S-10: Part #S212; TPI & TBI: Part #S195), and
• Classic Motorbooks (S-10: Part #116549; TPI & TBI: Part #117942;
  Jaguar: Part #118438; Datsun Z: Part #115501; Volvo 200: Part #122587).

© JTR
All rights reserved.