RADIATOR HOSE SPLICERS & CUSTOM HOSES

Stealth Conversions offers ALUMINUM hose splicers: Choose the quantity/price and size desired. Our aluminum splicers are available in the following sizes: 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" 1", 1-1/8",
1-1/4", 1-5/16", 1-3/8", 1-1/2", 1-9/16", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1//4", 2-1/2". Cost: $10 for one, $12 for two, $19 for three; each one after is $4 up to five.(for purchases of more than five, please contact us for special arrangements)

On some engine swaps, getting a molded radiator hose to fit your particular application can be impossible. We often cut and splice different sections of radiator hoses to fit a swap.

For example, on S-10 Truck and Volvo V8 conversions, we cut and splice an upper hose from a Ford F-150 truck to make the lower radiator hose shown above, which uses a hose splicer (or Tee) and a hose reducer bushing. Hose reducers are available at auto-parts stores. Stealth Conversions also stocks hose reducer bushings. Cost is about $6 each.

When splicing hoses, make sure the connector has beaded ends to securely hold the radiator hose. We can’t tell you how many times we have seen hoses slip off of hose splices made with smooth pipe or tubing.

Make sure the hose is flexible enough to allow for normal engine movement without putting stress on the radiator fittings. Beware of using metal tubing with short pieces of rubber hose at each end to connect to the engine and radiator, as seen so often in car magazines. The short pieces of rubber hose do not allow enough flexibility for normal engine movement, and will eventually cause radiator failure.

last edited 10-19-2016

Transitional Hose splicers

Coolant Sight Glass — with air bleed fitting.

Bleeding air out of cooling system.