LS1 / LS2 / LS3 & LSX V8 Engine Swap - Cooling System Parts, Ultra short thermostat housing, Stealth Conversions

Ultra short thermostat housing
for LS1 / LS2 / LS3 & LSX waterpumps

Stealth Conversions
The Parts Division of JTR (Jaguars That Run)

Please Use the Books Ordering Form to order manuals!

Ultra Short Thermostat Housing for LS1/ LS2 / LS3 & LSX V8 engine swaps

V8 Engine swap, thermostat housing for LS1 / LS2 / LS3 & LSX waterpump, ultra short

ULTRA SHORT THERMOSTAT HOUSING FOR LS1 / LS2 / LS3 & LSX WATERPUMPS
The thermostat housing in the background is a typical aftermarket thermstat housing
our part is much shorter. See below for measurements and further info.

LS1 / LS2 / LS3 & LSX V8 Thermostat Housing for Waterpump, Ultra Short,
Comes in four sizes, please specify
hose size: 1-1/4", 1-5/16", 1-1/2", or 1-9/16".
#USTH-1, $49, including shipping

Thermostat housing for LS1 / LS2 / LS3 & LSX Waterpump, Ultra Short
Part # USTH-1. Shipping weight, 1 lb

Will fit LS1 water pumps if used with LS2 style thermostat.

Comes in four sizes,
please specify your hose size: 1-1/4", 1-5/16", 1-1/2", or 1/9/16".

Photo Above: The thermostat housing in the background is a typical aftermarket thermstat housing — our part is much shorter.

The 1-5/16" housing is 1.42" tall.
The 1-9/16" housing is 1.27" tall.
The typical aftermarket 1-9/16" housing is 2.07" tall.

Photo Below: The factory 1-9/16" housing (shown below) is about 2.57" tall

V8 Engine swap, Ultra short thermostat housing for LS1 / LS2 waterpump

Jump Back to the Top

JTR engine swapping manuals are available directly from JTR Publishing,
As well as through a number of retailers, including:
• Summit Racing (S-10: Part #JTR-S10; Jaguar: Part #JTR-JAG),
• JEGS (S-10: Part #116549; TPI & TBI: Part #117942),
• Steve Smith Autosports (S-10: Part #S212; TPI & TBI: Part #S195), and
• Classic Motorbooks (S-10: Part #116549; TPI & TBI: Part #117942;
Jaguar: Part #118438; Datsun Z: Part #115501; Volvo 200: Part #122587).